An emergency stop is the red, latching control on a yellow background that when pressed, overrides everything else and brings a machine to a safe stop in an emergency.
Design rules come from EN ISO 13850 and EN 60204-1: it must latch when struck, need a deliberate manual reset, and resetting must never restart the machine on its own. Under PUWER Regulation 16 e-stops are provided where appropriate, as the backup for the moment other safeguards have failed.
EN IEC 62061 is a machinery standard for safety-related control systems; it grades each safety function by Safety Integrity Level.
The technical file is the evidence pack behind a CE or UKCA mark: drawings, calculations, the risk assessment, standards applied and test results.
Guard locking keeps an interlocked guard locked shut until the machine inside has come to a complete stop and the guard has been released by a control device.
For nearly two decades, the Machinery Directive (2006/42/EC) has been the backbone of machinery safety compliance across Europe.
Introduction Machinery is now software-defined, connected, and increasingly autonomous. The Machinery Regulation (EU) 2023/1230 treats software failures as
A question we hear regularly from clients is which assessment do they actually need for their machinery —
Speak to a Knox Thomas engineer about compliance, risk assessment and safeguarding for your machinery.
