Compliance Gap Analysis for Offshore Wind OEMs

Identifying exactly where your turbine, foundation, or BOP systems fall short of CE/UKCA requirements, before a notified body or client audit does.
Offshore wind turbine array

Compliance Gap Analysis for Offshore Wind OEMs

Offshore wind OEMs face one of the most demanding compliance landscapes in engineering: turbines, foundations, cabling systems, and substations must satisfy overlapping requirements under the Machinery Directive/Regulation, Low Voltage Directive, EMC Directive, and often ATEX where potentially explosive atmospheres are present. Gaps in technical documentation rarely surface until a notified body assessment or a client’s due diligence audit is already underway, by which point they are expensive and slow to fix.

At KnoxThomas, we benchmark your existing design files, risk assessments, and test evidence against the applicable essential requirements and harmonised standards, then hand you a clear, prioritised gap report and remediation plan. You go into certification or client review knowing exactly where you stand and what needs closing first.

Supporting Compliant Offshore Wind Systems

Offshore wind OEMs, whether building nacelles, blade sets, foundations, or balance-of-plant electrical systems, are increasingly expected to demonstrate compliance not just against a single directive but against multiple overlapping regulations at once. A turbine control cabinet may need to satisfy the Machinery Directive/Regulation, the Low Voltage Directive, and the EMC Directive simultaneously, while offshore substations often bring ATEX requirements into scope too.

Uncertainty commonly arises around which harmonised or designated standards actually apply, how much test evidence a technical file needs to hold, and whether existing supplier declarations can be relied upon once components are integrated into a larger system.

Health and Safety Legislation UK - Knox Thomas
Health and Safety Legislation UK - Knox Thomas

KnoxThomas benchmarks your existing technical file, design records, and test evidence against every applicable regulation, then hands you a single prioritised gap report ranked by risk and effort to close. Our review regularly covers verification and testing evidence for electrical equipment on turbine and substation control systems.

For example, an OEM preparing a nacelle control cabinet for supply might discover during our review that insulation resistance testing was recorded informally rather than documented to the standard a notified body would expect. Flagging this early means it can be corrected on the shop floor, not during a stalled certification review.

Relevant legislation and standards may include the Machinery Directive 2006/42/EC and the incoming Machinery Regulation (EU) 2023/1230, the Low Voltage Directive 2014/35/EU, the EMC Directive 2014/30/EU, ATEX 2014/34/EU where applicable, and the BS EN IEC 61400 series for wind turbine systems. A defensible Declaration of Conformity depends on evidence for every one of these being in place and traceable.

Our goal is to give you a clear, ranked view of every compliance gap well before a notified body, client, or port authority asks for it, so certification stays on schedule and delivery milestones aren’t put at risk.

Health and Safety Legislation UK - Knox Thomas

Our Support Services Cover:

01. Gap Analysis & Benchmarking

We review your existing technical file, design records, and test evidence against every applicable directive and regulation, flagging exactly where evidence is missing, out of date, or insufficient.

02. Harmonised Standards Mapping

We identify which harmonised and designated standards actually apply to your turbines, foundations, or balance-of-plant systems, including relevant parts of the BS EN IEC 61400 series.

03. CE/UKCA Compliance Support

We help OEMs understand their marking duties as manufacturers, including where your equipment is supplied as part of a larger integrated turbine or substation system.

04. Risk Assessment Gap Review

We compare your risk assessments against the essential health and safety requirements for offshore wind equipment, highlighting missing controls or residual risks before certification.

05. Remediation Planning

We provide a clear, prioritised remediation plan so gaps can be closed efficiently, without unnecessary delay to vessel mobilisation or installation schedules.

06. Technical Documentation Support

We assist with the technical documentation itself, including test evidence, standards justification, user information, and Declaration of Conformity support for offshore wind projects.

How we can help?

For a free initial consultation, simply book an appointment via our meeting system or fill out the contact form to email us. We aim to respond to all enquiries within 24 hours.

CE Mark Recognition - Knox Thomas

Subscribe to Our Newsletter!

*Indicates Required